Medhu Vadai Recipe | How to make Urad Dal Vada In Grinder (2024)

Medhu Vadai Recipe | How to make Urad Dal Vada In Grinder (1)

Medhu Vadai Recipe | How to make Urad Dal Vada In Grinder (2)

Medu vada aka Urad dal vada / Ulundu vadai is a famous South indian snacks and breakfast recipe especially in Tamil nadu. We generally make medhu vadai for festivals or for guests. Last month I got a request from a reader to post crispy medhu vadai recipe using grinder. As I myself have not tried medu vada using grinder, I was hesitant to make this post.

Usually I make medu vada only using mixie. But then I took this as an opportunity to try out vada batter using grinder & I did it. But my vada drank so much of oil but still it was light n crispy.Then I found I have added more water which made my vada absorb more oil. So I tried it confidently for the second time and got it perfect. For some recipes, I feel video would give better understanding. So I wanted to capture vada batter making.

Last week my in-laws were with us. I told my MIL to grind vada batter and I captured it. Hope the video looks good & clear. But the vadas in the pictures what you see here are made by me. If I can make a good shaped vadas, then anyone can make it easily. So do follow this recipe carefully. U will get it right. To make a perfect medu vada, there are some points to be noted while grinding the batter. I have shared them below. Do read it before watching the video or trying this recipe. Hope these points would help all the beginners. Lets see how to make crispy medu vada at home with some tips & tricks!

Medhu Vadai Recipe | How to make Urad Dal Vada In Grinder (3)

TIPS & TRICKS TO MAKE CRISPY VADA

  • Always soak the white, round urad dal for 45 to 60 minutes maximum. If you are grinding in mixie, then you can soak it for 2-3 hours.

  • When you are grinding the batter using grinder, do stand nearby. U have to spend 12-15 minutes near the grinder by sprinkling water and wiping the sides every now and then which is most important.DO NOT ADD SALT WHILE GRINDING.Add salt just before frying the vada.

  • Never pour all the water in one stretch. Just add little water every 2-3 minutes by wiping the sides of grinder with a spatula. Batter should not get stuck in the sides.

  • Vada batter should not be too light & airy. It should be tight to hold. If the batter is too light,vada will absorb more oil.

  • Also the batter should be non-sticky when u touch it by dipping your hands in water.

  • To check the right consistency of vada batter,drop a small ball of batter in a bowl of water. It will float to some extent. Also when you try to drop the batter, it should form a stiff peak ( Refer picture ).

  • Keep the batter covered in refrigerator till use. Add salt & onions only before frying the vada. Beat the batter before frying to provide aeration which is very important to get crispy, light vadas. Then add onions and other spices.

  • Add 1/2 tsp of toor dal for 1/2 cup of urad dal while soaking. It helps the vada to prevent oil absorption.

  • U can also add 1 tsp of rice flour to get super crispy vadas like in restaurants.

  • But if you grind vada batter properly, then no need to add rice flour or toor dal. Vada will come out super crispy by itself.
  • To keep the vada crispy for hours,just pre heat the oven in the least temperature & place your vadas in a tray inside the oven. By this way,vada stays crispy. I got this tip from Vahchef’s site but I have not tried it personally though.

Medhu Vadai Recipe | How to make Urad Dal Vada In Grinder (4)

Medhu vadai recipe/Urad dal vada


Medhu Vadai Recipe | How to make Urad Dal Vada In Grinder (5) South Indian breakfast special Urad dal vada aka Medhu vadai recipe with stepwise pictures & video !

Cuisine: Indian

Category: Snacks

Serves: 10

Prep time: 60 Minutes

Cook time: 15 Minutes

Total time: 75 Minutes

INGREDIENTS
1 cup - 250ml

To soak
  • White round urad dal - 1/2 cup
  • Toor dal - 1/2 tsp (optional )
  • Water - as needed
To mix in the batter
  • Small onion - 10 nos or big onion - 1
  • Curry leaves - few
  • Green chillies - 1 ( finely chopped)
  • Hing/Asafetida - 1/8 tsp
  • Crushed pepper - 1/2 tsp
  • Cumin seeds/Jeera - 1/2 tsp (optional)
  • Salt - as needed
  • Cooking oil - to deep fry
Rice flour – 1 tsp, to add in the batter before making vada ( optional )

METHOD

  • Wash and soak the urad dal & toor dal ( if using ) in enough water for 1 hour minimum and 4 hours maximum. Keep the soaking urad dal inside the refrigerator. Drain all the water completely and use this water for grinding. Add the soaked urad dal to the grinder. Switch on & start running. Do not add water.
Medhu Vadai Recipe | How to make Urad Dal Vada In Grinder (6)
  • Do not add water in the beginning. Let the grinder run for few seconds without water. When the dal starts to stuck in the sides,add little water ( say 1/8 cup ). Take a spatula and wipe all the sides and center part. Again sprinkle little water and stand nearby wiping the sides. Make sure there are no dals visible or stuck up in the sides. Repeat this by adding water & wiping sides for 12-14 minutes. Batter will become fluffy and the quantity would be more.
Medhu Vadai Recipe | How to make Urad Dal Vada In Grinder (7)
  • Now remove a small portion of batter in the spatula, when you drop the batter, it should form a pointed tip. Also check the batter by dropping a small ball in a bowl of water. It should not settle down or dissolve instead it should float.
Medhu Vadai Recipe | How to make Urad Dal Vada In Grinder (8)
  • Remove the batter from the grinder completely and keep in a vessel. If you are making vada immediately proceed OR store the batter in the refrigerator till use. Do not keep it outside.
  • Before deep frying the vada,remove the batter from the refrigerator. Beat the batter well with your hands. It provides aeration and helps to give you crispy & light vada.
  • Now add salt , finely chopped onion, hing, chillies, curry leaves, pepper corns & cumin seeds. Mix well.
Medhu Vadai Recipe | How to make Urad Dal Vada In Grinder (9)
  • Heat oil in a kadai , check the temperature of oil by dropping a pinch of batter. If it rises immediately, oil is just right. Shape the vada using your palm. Make a hole in the center using the thumb finger. Drop the vada into the oil by slightly tilting your fingers. Flip both the sides and cook the vada till the bubbles ceases. Remove & drain in a tissue paper.
Medhu Vadai Recipe | How to make Urad Dal Vada In Grinder (10)
Serve hot & Enjoy !

Medhu Vadai Recipe | How to make Urad Dal Vada In Grinder (11)


Enjoy this hot & crispy medu vada as breakfast or as an evening snack with coconut chutney !


Medhu Vadai Recipe | How to make Urad Dal Vada In Grinder (12)


Medhu Vadai Recipe | How to make Urad Dal Vada In Grinder (2024)

FAQs

Why is my medu vada not crispy? ›

Expert Tips

Adding pinch of baking soda helps in crispy medu vada. Soak urad dal in hot water. Hot water reduces the soaking time. Don't add too much water when grinding the batter.

What is medu vada batter made of? ›

The medu vada is made primarily of black lentils (urad dal) batter. The black lentils are soaked in water for several hours, and then ground to a paste.

Why are my urad dal vada hard? ›

Don't soak the urad dal for more than 8 hours as this will result in a thin batter that absorbs lots of oil! Why are the vadas hard and not soft and fluffy? The trick is to soak your lentils for the perfect amount of time - 6 hours - for the ultimate light and fluffy batter. Over-soaked lentils = greasy vadas.

Why is my vada batter bitter? ›

Firstly do not let the mixer-grinder or the batter heat up while grinding. Warm or hot batter makes hard medu vada. Sometimes they may even taste bitter. So always use ice cold water to grind the lentils.

Why is my medu vada oily? ›

If the vada absorbs too much oil while deep-frying, there could be two reasons for the same. One, the oil is not hot enough. Second, too much water is added while grinding the batter. Finally, after you've fried the vada, drain them on an oil-absorbing paper towel.

Which oil is best for frying vada? ›

With its neutral taste and high smoke point, safflower oil is an excellent choice for Indian cooking, suitable for a range of high-heat methods such as frying, stir-frying, and preparing curries.

How many hours to soak urad dal? ›

I usually soak it in between 4-5 hours. The minimum duration can be considered as 4 hours. To make Urad dal while soft to grind it needs to be soaked for at least 4 hours.

Why there is a hole in medu vada? ›

Adding a hole is so important while making vadai. The main reason for putting a hole while making medu vadai is for the moisture to escape from the middle. It also helps in cooking the vadai evenly.

Why is my medu vada not soft? ›

Soak the urad dal well in advance

Soak the dal overnight or for at least 5-6 hours. If your dal has not been soaked properly, you will still be able to grind and mix it. However, after frying, you'll realise your vadas are not soft on the inside - they might have rigid portions that don't have a nice mouthfeel.

What are the disadvantages of medu vada? ›

It's not going to be healthy oil, no chance. Plus it'll be refried in oil, adding trans fats. Idli is way better as a snacking option.

Is it good to eat medu vada everyday? ›

Medu vada: While having a medu vada once or twice is alright, having it as a daily breakfast item will add a lot of oil to your diet and so, should be avoided.

Why is my batter not getting crispy? ›

Soggy batter prevention that works every time

If you've gotten the dreaded limp fried coating, you might have over-mixed your batter, which forms more pesky gluten that readily soaks up the oil. Mix batter until just combined — no more, and no less. You might also be making the mistake of adding warm water.

Why is my deep-frying not crispy? ›

If the oil gets too cold, anything below 355°, then the food ends up absorbing all of the oil resulting in a greasy, soggy mess. If the oil gets too hot, anything above 400°, then the outside will brown too quickly before the inside can properly cook.

What makes frying more crispy? ›

The perfect temperature for frying foods is 375°F (190°C). This temperature provides the ideal combination of heat and oil saturation to achieve a crispy, golden-brown texture. However, some recipes may require higher or lower temperatures depending on the type of food being fried.

Why is my deep fry batter not crispy? ›

  1. Oil has to be high, as in 350-400.
  2. Flour type matters but I've always had the roomie buy it, run of the mill every day flour doesn't cut it.
  3. Crispy stuff has to be DRY before frying. ...
  4. Over will help dry it and crisp it due to the heat, also can add a bit of that darkened look to food that I like.
Nov 28, 2015

References

Top Articles
Latest Posts
Article information

Author: Aron Pacocha

Last Updated:

Views: 6010

Rating: 4.8 / 5 (48 voted)

Reviews: 95% of readers found this page helpful

Author information

Name: Aron Pacocha

Birthday: 1999-08-12

Address: 3808 Moen Corner, Gorczanyport, FL 67364-2074

Phone: +393457723392

Job: Retail Consultant

Hobby: Jewelry making, Cooking, Gaming, Reading, Juggling, Cabaret, Origami

Introduction: My name is Aron Pacocha, I am a happy, tasty, innocent, proud, talented, courageous, magnificent person who loves writing and wants to share my knowledge and understanding with you.